Hand-held automatic nylon binding machine standard

【Equipment characteristics】：
1. The equipment automatically feeds, perforates, pulls, cuts the tail, and recyles the waste within 1 second, which is at least 4 times more effective than manual bundling.
2. The new structure is more compatible with the quality process of the cable tie, and almost all the cable ties that can be fed through the vibrating disk can be used normally.
3. Two waste recycling methods are available, waste tube and mini waste box;
4.The touch screen has an automatic counting function, and the machine will automatically record the count of the tied tie (displayed on the touch screen);
5.The size of the ring of the binding of the cable tie can be adjusted by the touch screen, and the tightening force of the cable tie can be adjusted by the screw.
6.The first double-wheel structure of pulling material, the gun head pulling wheel can automatically remove the stuck/blocked material through the forward/reverse gear;
7.The equipment has a variety of automatic detection functions, with the I/O interface can show the running status of various parameters in real time, once found abnormal machine alarm and stop running immediately, the material tube blocking fault can be automatically eliminated, after discharge press the trigger to automatically start running, the feeding fault needs to be manually eliminated, the machine is also equipped with a manual mode, you can run a certain part to monitor each operation;
8.The equipment is equipped with a temperature control system to improve the brittleness of the cable ties under low temperature conditions in winter, effectively avoiding the head burst or fracture of the cable ties;
9.The equipment can be optional to install the gun head fixing bracket, freeing the hands of employees to facilitate combing products;
10.If the air pressure of the production site is not up to standard or unstable, the equipment can be equipped with a pressure stabilizer;
11.When the conventional specification equipment is in normal operation, the distance from the noise source is 1-1.5 meters, and the noise is only about 75 decibels. The equipment can be equipped with customized soundproof cover, which is more beautiful, lower noise and safer.
12.The important parts of the equipment have safety marks, and the equipment has multiple safety protection devices;