Hand-held automatic binding machine

【Equipment characteristics】：When the diameter of the product is larger and the cable tie is longer, such as when the length of the cable tie is more than 150mm, it is recommended to choose the connected cable tie machine equipment, such large specifications equipment, conventional vibration disk feeding method, first of all, the feeding speed is slow, and the maximum feeding amount per unit time is equivalent to the capacity limit of the unit time, followed by when the cable tie is longer, Even the machine cable tie is still inevitably deformed, which affects the success rate and stability of the equipment. Finally, the large-size vibration disc itself has a large shape and heavy weight. Even if the vibration disc can be set to sleep time to avoid being in operation all the time, the noise of the vibration disc is relatively large when the equipment is running, and the distance from the noise source is 1-1.5 meters. About 85 decibels;
Compared with the traditional vibrating disk feeding method, the connected tie tie machine is a good solution to the drawbacks of the traditional large-size equipment, the equipment is smaller and lighter at the same time, the success rate is higher and the stability is better, which greatly improves the use experience, and because of the stability and controllability of the feeding speed, the production capacity per unit time is higher; In terms of the cost of cable ties, the one-piece cable ties of the same specification will be slightly more expensive than the cable ties used in the bag installation machine, but the one-piece cable ties developed by Jiachengyue have wider selectivity and lower cost than other one-piece cable ties on the market.
The tie tie of this equipment is based on the new connection method developed by Jiachengyue and the machine connected by the tie tie. Whether it is a tie tie or a tie tie connecting machine, Jiachengyue has its own patent. Any tie tie supplier can produce the corresponding tie tie after using the tie tie connecting machine. Do not specify the cable tie supplier and do not bind the cable tie;
At present, the specifications of the one-piece binding machine are 3.6*200mm, and more equipment of different specifications will be added in the future.